![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextgreen.png)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextred.png)
![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextgreen.png)
![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltext_open_medium.gif)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextred.png)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltext_restricted_medium.gif)
Study of Effect of Gas Tungsten Pulse Arcing on Surface Modification of Martensitic Stainless Steel
Subscribe/Renew Journal
Heat energy generated from Gas Tungsten Pulse Arcing process has been used for surface modification of martensitic stainless steel. Arcing was carried out with varied pulse parameters with heat input maintained constant. Variations were observed in heating and cooling patterns of the fused zone. Their effects on fusion, solidification and consequent influence on microstructure of the fused material have been studied. The Temperature Vs. Time curve and isotherm of the fused zone have been analytically drawn. They are used to predict microstructural changes in the fused and adjacent heat affected zone of modified surface. The theoretical predictions are verified by the relevant observations on the modified surfaces. Improvement in hardness of fused zone compared to base material has been studied in conformity with the microstructural changes of the modified matrix.
Keywords
Stainless Steel, Thermal Analysis, Fusion Geometry, Microstructure, Hardness.
User
Subscription
Login to verify subscription
Font Size
Information
- (1) Groning, P, Nowak, S. and Schlapbach, L. (1991). Temp. dependent surface modifications of AISI316L and AISI440C stainless steel substrates. Appl Surf Sci, 52(4), pp.333-337.
- (2) D'Oliveira, A.S.C.M., Paredes, R.S.C. and Santos, R.L.C. (2006) Pulsed current plasma transferred arc hardfacing. J. of Mater Processing Technol, 171(2), pp.167-174.
- (3) Hashimoto, M., Miyamoto, Y., Kubo, Y., Tokumaru, S., Ono, N., Takahasi, T. and Ito, I. (1995), Surface modification of stainless steel in plasma environments, Mater Sc. & Eng, 198(1-2), pp.75-83.
- (4) Tsai, W., Shieh, C. and Lee, J. (1994) Surface modification of ferritic stainless steel by laser alloying, Thin Solid Films, 247(1), pp.79-84.
- (5) Kwok, C.T., Cheng, F.T. and Man, H.C. (2000) Laser surface modification of UNS S31603 stainless steel. Part I : microstructures & corrosion characteristics, Mater Sc.& Eng, 290(1-2), pp.55-73.
- (6) Zou, J.X., Zhang, K.M., Hao, S.Z., Dong, C. and Grosdidier, T.,(2010). Mechanism of hardening, wear and corrosion improvement of 316L Stainless steel by low energy high current pulsed electron beam surface treatment, Thin Solid Films, 519(4), pp.1405-1415.
- (7) Steyer, P., Valette, S., Forest, B., Millet, J. P., Donnet, C. and Audouard, E. (2006) Surface modification of martensitic stainless steels by laser marking and its consequences regarding corrosion resistance, Surf Eng, 3, pp.167-172.
- (8) Pan, Q.Y., Huang, W.D., Song, R.G., Zhou, Y.H. and Zhang, G.L. (1998) The improvement of localized corrosion resistance in sensitized stainless steels by laser surface remelting, Surf & Coatings Technol, 102(3), pp.245-255.
- Orlowicz, A.U. and Trytek, A. (2005), Use of the GTAW method for surface hardening of cast iron, Weld International Res Suppl,19 (5), pp.341-348.
- (10) Ghosh, P.K. and Kumar, R.(2014) Surface modification of Micro-Alloyed high-strength low-alloy steel by controlled TIG arcing process, The Minerals, Metals & Materials Society and ASM International, doi:10.1007/s11661-014-2670-x.
- (11) Goyal, V.K. (2007), Effect of thermal and solidification behavior on characteristics of pulsed current GMA weld, Ph.D thesis, IIT, Roorkee, India
- (12) Ghosh, P.K., Goyal, V.K., Dhiman, H.K. and Kumar, M. (2006), Thermal and metal transfer behavior in pulsed current gas metal arc weld deposition of Al-Mg alloy, Sci & technology of welding and joining, 11(2), pp.232-242.
- (13) Poorhaydari, K., Patchett, B.M. and Ivey, D.G. (2005). Estimation of cooling rate in the welding of plates with intermediate thickness, Weld Res, October, pp.149-s-155-s.
- (14) Nguyen, N.T., Ohta, A., Matsuoka, K., Suzuki, N. and Maeda, Y.(1999), Analytical solutions for transient temperature of semi-infinite body subjected to 3-D moving heat sources, Weld Res, Aug, pp.265-s-274-s.
![](https://i-scholar.in/public/site/images/abstractview.png)
Abstract Views: 478
![](https://i-scholar.in/public/site/images/pdfview.png)
PDF Views: 10