Indian Welding Journal

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Effect of Surface Tension on Bead Profile formation in Flux Cored Arc Welding


Affiliations
1 Welding Research Institute, BHEL, Tiruchirappalli, India
2 Indian Institute of Science, Bangalore, India
     

   Subscribe/Renew Journal


A two dimensional weld pool model based on the pressure balance has been used to predict the weld pool height and reinforced area for rutile type flux cored arc welding. The results reveled that the influence of interfacial (surface) tension force on bead shape formation is approximately 25%. At higher current levels effect of these forces are insignificant.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 342

PDF Views: 4




  • Effect of Surface Tension on Bead Profile formation in Flux Cored Arc Welding

Abstract Views: 342  |  PDF Views: 4

Authors

V. Balraj
Welding Research Institute, BHEL, Tiruchirappalli, India
K. L. Rohira
Welding Research Institute, BHEL, Tiruchirappalli, India
K. S. Srinivasamurthy
Indian Institute of Science, Bangalore, India

Abstract


A two dimensional weld pool model based on the pressure balance has been used to predict the weld pool height and reinforced area for rutile type flux cored arc welding. The results reveled that the influence of interfacial (surface) tension force on bead shape formation is approximately 25%. At higher current levels effect of these forces are insignificant.