Open Access
Subscription Access
Open Access
Subscription Access
Microstructural Characteristics and Mechanical Properties of Dissimilar Joints of Aisi 316LN Austenitic Stainless Steel and Modified 9Cr-1Mo Steel
Subscribe/Renew Journal
In liquid metal cooled fast breeder reactors, the dissimilar joint between grade 91 ferritic steel and 316LN stainless steel is frequently encountered. For better integrity assessment, mechanical properties of each region need be evaluated. In the present investigation, dissimilar joints between grade 91 to 316LN SS were fabricated by shielded metal arc welding process using nickel based electrodes. Mechanical properties (Tensile and impact toughness) of different regions were evaluated by placing the notch at each location. Microhardness variation across the dissimilar joint was recorded. Microstructural analyses of various regions were done by optical and scanning electron microscopy. From this investigation, it is understood that the in-homogeneous mechanical properties were observed across the dissimilar joint. The development of complex microstructure at the fusion interfaces will alter the mechanical properties across the dissimilar joint.
Keywords
Welding, Dissimilar Joint, Mechanical Properties, Microstructure, Microhardness.
User
Subscription
Login to verify subscription
Font Size
Information
- Karthick K, Malarvizhi S, Balasubramanian V, Krishnan SA, Sasikala G and Albert SK (2017); Tensile properties of shielded metal arc welded dissimilar joints of nuclear grade ferritic steel and austenitic stainless steel, Journal of the Mechanical Behavior of Materials, 25(5-6), pp.171178.
- Teemu S, Matias A, Roman M, Pekka N, Päivi KR, Ulla E and Hannu H (2016); Microstructural, mechanical, and fracture mechanical characterization of SA 508-Alloy 182 dissimilar metal weld in view of mismatch state, International Journal of Pressure Vessels and Piping, 145, pp.13-22.
- Jang C, Lee J, Sung KJ and Eun JT (2008); Mechanical property variation within inconel 82/182 dissimilar metal weld between low alloy steel and 316 stainless steel, International Journal of Pressure Vessels Piping, 85(9), pp.635-646.
- Kim JW, Lee K, Kim JS and Byun TS (2009); Local mechanical properties of alloy 82/182 dissimilar weld joint between SA508 Gr.1a and F316 SS at RT and 320°C, Journal of Nuclear Materials, 384(3), pp. 212-221.
- Pandey S, Prasad R, Singh PK and Rathod DW (2014); Investigation on dissimilar metal welds of SA312 type 304LN pipe (extruded) and SA508Gr.3Cl.1 pipe (forged), Bhabha Atomic Research Centre, Mumbai, India, Report No. 2008/36/107-BRNS/4038A.
- Zhang ZL, Hauge M, Thaulowa C and Ødegård J (2009); A notched cross weld tensile testing method for determining true stress-strain curves for weldments, Engineering Fracture Mechanics, 69(3), pp.353-366.
- Wendell B, Jones CR, Hills D and Polonis H (1991); Microstructural evolution of modified 9Cr-1Mo steel, Metallurgical Transactions A, 22, pp.1049-1058.
- Wang HT, Wang GZ, Xuan FZ, Liu CJ, Tu ST (2014) Local mechanical properties of a dissimilar metal welded joint in nuclear power systems, Materials Science and Engineering: A, 568, pp.108-117.
- Rathod DW, Pandey S, Singh PK and Prasad R (2015); Mechanical properties variations and comparative analysis of dissimilar metal pipe welds in pressure vessel system of nuclear plants, Transactions of the ASME, Journal of Pressure Vessel Technology, 138(1), pp. 011403-011409.
- IGCAR, Prototype fast breeder reactor specification for the qualification of the welding consumables, Indira Gandhi Centre for Atomic Research, Kalpakkam, India, Report No. PFBR/32040/SP/1002/R-0.
Abstract Views: 599
PDF Views: 8