Indian Welding Journal

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Reclamation of Main Drive Spindle of Blooming & Billet Mill of Bhilai Steel Plant


Affiliations
1 Reclamation Shop, Bhilai Steel Plant, Pin- 490001, Chhattisgarh, India
2 AGM, Blooming & Billet Mill, Bhilai Steel Plant, Pin- 490001, Chhattisgarh, India
3 DGM, Reclamation Shop, Bhilai Steel Plant, Pin- 490001, Chhattisgarh, India
     

   Subscribe/Renew Journal


Blooming and Billet Mill is the mother mill of Bhilai Steel Plant. Yearly about 2.5 MT ingots are rolled in to blooms in the Blooming Mill & these blooms are further rolled in to billets in continuous Billet Mill. Billets are fed to Wire Rod Mill & Merchant Mill as raw material

The main drive spindle gives drive to main stand roll. Due to continuous working, the slide block seating and the bearing seating on the journal portion of spindle gets worn out. The average working life of spindle is around 6 months.

The estimated cost of a new spindle assembly is approx. Rs. 5 Crores. Weight of spindle is 32.63 T. The present Russian units & also other units around the world are reluctant to supply such massive spare. Hence it was decided to reclaim slide blocks seating & as well as bearing seating of main drive spindle.

This paper deals with the reclamation technology adopted to revive this vital spare. This paper includes selection of welding consumables, preheat & post heat treatment, welding parameters, preparation & precautions for reclamation procedure.

Blooming and Billet Mill is the mother mill of Bhilai Steel Plant. Yearly about 2.5 MT ingots are rolled in to blooms in the Blooming Mill & these blooms are further rolled in to billets in continuous Billet Mill. Billets are fed to Wire Rod Mill & Merchant Mill as raw material

The main drive spindle gives drive to main stand roll. Due to continuous working, the slide block seating and the bearing seating on the journal portion of spindle gets worn out. The average working life of spindle is around 6 months.

The estimated cost of a new spindle assembly is approx. Rs. 5 Crores. Weight of spindle is 32.63 T. The present Russian units & also other units around the world are reluctant to supply such massive spare. Hence it was decided to reclaim slide blocks seating & as well as bearing seating of main drive spindle.

This paper deals with the reclamation technology adopted to revive this vital spare. This paper includes selection of •welding consumables, preheat & post heat treatment, welding parameters, preparation & precautions for reclamation procedure.


User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 321

PDF Views: 5




  • Reclamation of Main Drive Spindle of Blooming & Billet Mill of Bhilai Steel Plant

Abstract Views: 321  |  PDF Views: 5

Authors

Rajesh Sood
Reclamation Shop, Bhilai Steel Plant, Pin- 490001, Chhattisgarh, India
Ajay Bedi
AGM, Blooming & Billet Mill, Bhilai Steel Plant, Pin- 490001, Chhattisgarh, India
Alok Jha
DGM, Reclamation Shop, Bhilai Steel Plant, Pin- 490001, Chhattisgarh, India

Abstract


Blooming and Billet Mill is the mother mill of Bhilai Steel Plant. Yearly about 2.5 MT ingots are rolled in to blooms in the Blooming Mill & these blooms are further rolled in to billets in continuous Billet Mill. Billets are fed to Wire Rod Mill & Merchant Mill as raw material

The main drive spindle gives drive to main stand roll. Due to continuous working, the slide block seating and the bearing seating on the journal portion of spindle gets worn out. The average working life of spindle is around 6 months.

The estimated cost of a new spindle assembly is approx. Rs. 5 Crores. Weight of spindle is 32.63 T. The present Russian units & also other units around the world are reluctant to supply such massive spare. Hence it was decided to reclaim slide blocks seating & as well as bearing seating of main drive spindle.

This paper deals with the reclamation technology adopted to revive this vital spare. This paper includes selection of welding consumables, preheat & post heat treatment, welding parameters, preparation & precautions for reclamation procedure.

Blooming and Billet Mill is the mother mill of Bhilai Steel Plant. Yearly about 2.5 MT ingots are rolled in to blooms in the Blooming Mill & these blooms are further rolled in to billets in continuous Billet Mill. Billets are fed to Wire Rod Mill & Merchant Mill as raw material

The main drive spindle gives drive to main stand roll. Due to continuous working, the slide block seating and the bearing seating on the journal portion of spindle gets worn out. The average working life of spindle is around 6 months.

The estimated cost of a new spindle assembly is approx. Rs. 5 Crores. Weight of spindle is 32.63 T. The present Russian units & also other units around the world are reluctant to supply such massive spare. Hence it was decided to reclaim slide blocks seating & as well as bearing seating of main drive spindle.

This paper deals with the reclamation technology adopted to revive this vital spare. This paper includes selection of •welding consumables, preheat & post heat treatment, welding parameters, preparation & precautions for reclamation procedure.