Indian Welding Journal

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Fusion Characteristics of an Al-Li Alloy in Pulsed-GMAW Process


Affiliations
1 Department of Science & Technology, New Delhi, India
2 Indian Institute of Technology, New Delhi, India
     

   Subscribe/Renew Journal


Fusion Characteristics of High Strength Heat-treatable Aluminium-Lithium Alloy Plates, Using GMAW Process in Continuous and Pulsed Mode Were Studied. Burn-off Characteristic of the 1.6mm Diameter 2319-filler Wire in Continuous and Pulsed Mode. Including Relation Between Pulse Current and Pulse Duration for one Droplet Detachment Per Pulse was Determined.

Keywords

Al-Li Alloy, Pulsed-GMAW, Bead Geometry, Aluminium Welding.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 287

PDF Views: 5




  • Fusion Characteristics of an Al-Li Alloy in Pulsed-GMAW Process

Abstract Views: 287  |  PDF Views: 5

Authors

G. Padmanabham
Department of Science & Technology, New Delhi, India
Sunil Pandey
Indian Institute of Technology, New Delhi, India

Abstract


Fusion Characteristics of High Strength Heat-treatable Aluminium-Lithium Alloy Plates, Using GMAW Process in Continuous and Pulsed Mode Were Studied. Burn-off Characteristic of the 1.6mm Diameter 2319-filler Wire in Continuous and Pulsed Mode. Including Relation Between Pulse Current and Pulse Duration for one Droplet Detachment Per Pulse was Determined.

Keywords


Al-Li Alloy, Pulsed-GMAW, Bead Geometry, Aluminium Welding.