Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Mechanical and Structural Characterization of DLC Prepared by PECVD Technique


Affiliations
1 Central Manufacturing Technology Institute, Tumkur Road, Bngaluru, India
2 Karunya University, Coimbatore, Tamil Nadu, India
     

   Subscribe/Renew Journal


Diamondlike carbon (DLC) films have been explored extensively in the past due to their highly attractive properties. However, the high level of internal stress developed during growth, calls for stress relieving process where structural and mechanical properties changes takes place. In the present study, the DLC is deposited on Si substrate using PECVD process and mechanical & structural changes during the post heat treatment process of DLC are investigated by using nanoindentation and Raman spectroscopy. Increase in hardness value confirmed the conversion of sp2 to sp3 structure while heat treatment.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Andersson, LP; Thin Solid Films, 86, 1981, 193.

  • Aisenberg, J; Vac, 'Sci. Technol.' A 2,1984, 369.

  • Enke, K; Dimigen, H; Hubsch, H; Appl. Phys. Lett. 36 (1980) 291.

  • Enke, K; 'Appl. Opt.', 24,1985, 508.

  • Sullivan, JP; Friedman, TA; Boca, AG: J. Electron. Mater. 26, 1997, 1022.

  • Friedman, TA; Sullivan, JP; Tallant, DR; Medlin, DI; Mater. Res. Soc. Symp. Proc. 441,1997. MRS Fall Meeting 1996, Contribution cb 15.5.

  • Lamberton, RW; Morley, S; Mclaughlin, JA; Maguire, PD: Thin Solid Films, 333, 1998, 14.

  • Wild, C; Koidl, P: Appl. Phys. Lett. 51,1987, 1506

  • Tang, X-M; Weber, J; Mikhailov, SN; MuKller, C; HaKnni, W; Hinter Mann, HE: 'J. Non-Cryst. Solids 185, 1995, 145.

  • Tang, X-M: Weber, J; Baer, Y; MuK ller, C; HaK nni, W; HinterMann, HE; J. Phys. Rev. B, 48, 1993, 10124.

  • Ogwu*, AA; Lamberton, RW; Morley, S; Maguire, P; McLaughlin, J: Physica B, 269, 1999, 335-344


Abstract Views: 180

PDF Views: 0




  • Mechanical and Structural Characterization of DLC Prepared by PECVD Technique

Abstract Views: 180  |  PDF Views: 0

Authors

Champuri Srinivas Rao
Central Manufacturing Technology Institute, Tumkur Road, Bngaluru, India
Leo Prakash
Karunya University, Coimbatore, Tamil Nadu, India

Abstract


Diamondlike carbon (DLC) films have been explored extensively in the past due to their highly attractive properties. However, the high level of internal stress developed during growth, calls for stress relieving process where structural and mechanical properties changes takes place. In the present study, the DLC is deposited on Si substrate using PECVD process and mechanical & structural changes during the post heat treatment process of DLC are investigated by using nanoindentation and Raman spectroscopy. Increase in hardness value confirmed the conversion of sp2 to sp3 structure while heat treatment.

References