Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Effect of Locality of Growth and Fibre Characteristics of Leucaena leucocephala on Kraft Pulp


     

   Subscribe/Renew Journal


The paper gives a comparative account of the evaluatinn of Su-babul (L leucocpphala) ,grown in Pune. At Siliguri and Rajabhatkhawa, for bleached grade kraft pulp. The data on pulping and bleaching properties indicate that the wood from all the three sources can be pulped to obtain bleachable grade pulp (Kappa No 26 ± t) using 17% active alkali as Na2O. The bleached pilip yield was about 45% in an the three cases. To achieve a pulp of 7% brightness CEH sequence with total chlorine application of 9.7% was adequate for samples for Pune and Rajabhatkhawa; whereas in case of Siliguri sample another stage of hypochlorite (2% av. Chlorine) was needed. The strength properties data indicate that wood of all the three localities is suitable for producing bleached kraft pulps for writing and printing papers. It was found that fibre characteristics (The Runkel ratio and shape factor) had marked influence on strenglh properties. The tensile index, tear index and burst index decreased with increase in the hunkel ratio and shape factor.
Font Size

User
About The Authors

S. V. Singh

Krishan Lal

S. S. Bhandari

S. P. Singh


Subscription Login to verify subscription
Notifications

Abstract Views: 225

PDF Views: 149




  • Effect of Locality of Growth and Fibre Characteristics of Leucaena leucocephala on Kraft Pulp

Abstract Views: 225  |  PDF Views: 149

Authors

Abstract


The paper gives a comparative account of the evaluatinn of Su-babul (L leucocpphala) ,grown in Pune. At Siliguri and Rajabhatkhawa, for bleached grade kraft pulp. The data on pulping and bleaching properties indicate that the wood from all the three sources can be pulped to obtain bleachable grade pulp (Kappa No 26 ± t) using 17% active alkali as Na2O. The bleached pilip yield was about 45% in an the three cases. To achieve a pulp of 7% brightness CEH sequence with total chlorine application of 9.7% was adequate for samples for Pune and Rajabhatkhawa; whereas in case of Siliguri sample another stage of hypochlorite (2% av. Chlorine) was needed. The strength properties data indicate that wood of all the three localities is suitable for producing bleached kraft pulps for writing and printing papers. It was found that fibre characteristics (The Runkel ratio and shape factor) had marked influence on strenglh properties. The tensile index, tear index and burst index decreased with increase in the hunkel ratio and shape factor.