Indian Journal of Chemical Technology

Open Access Open Access  Restricted Access Subscription Access

Magneto-Hybrid Nanofluid (Al2O3 / Cu−Oil) Flow in a Porous Square Enclosure with Cattaneo-Christov Heat Flow Model-Sensitivity Analysis


Affiliations
1 Department of Mathematics, School of Advances Sciences, Vellore Institute of Technology, Vellore 632 014, Tamil Nadu, India
 

The rheological behaviour of nanofluids is an important specification that has a substantial impact on the system performance. The effect of an inclined magnetic field on mixed convection in a square cavity through a porous medium has been numerically investigated in the current paper. Various levels of thermal conductivity have been maintained on each wall throughout the system. Additionally, the Cattaneo-Christov heat flow model is influenced in the energy equation. The conservation equations for primary, secondary, and mass momentum, energy, and nanoparticles with wall boundary conditions are dimensionless and coupled to proper scaling transformations. To address the dimensionless nonlinear coupled boundary value problem, a finite-difference computing methodology known as the Harlow-Welch Marker and Cell (MAC) method is used. The fundamental goal of this research is to look at the rheological behaviour of nanoparticles as base fluids in the aforementioned effects. The influence of factors on the physical framework such as Richardson number (Ri), Hartmann number (Ha), Darcy number (Da), Reynolds number (Re), and Prandtl number (Pr) is investigated graphically. The MATLAB software is used to obtain streamlined and isothermal contours. The findings indicate an enhancement in the average Nusselt number with an increase in the parameters. Furthermore, the presence of nanoparticles raises the average Nusselt number for low values of the Reynolds number. The system is analyzed with three convection stages of Richardson number, and it is also found that for mixed convection, the system holds better results. The obtained outcomes are compared with well-known existing findings to validate the present work.

Keywords

Mixed Convection, Al2O3 / Cu−Oil Nanoparticles, Porous Medium, Inclined Magnetic Field, Cattaneo-Christov Model.
User
Notifications
Font Size

  • Das S K,Choi S U S & Patel H E, Heat Transf Eng, 27 (2006) 3.

  • Eastman J A, Choi U S, Li S, Thompson L J & Lee S, Mater Res Soc Symp Proc, 457 (1997) 3.

  • Choi S U S, Zhang Z G, Yu W, Lockwood F E & Grulke E A, Appl Phys Lett, 79 (2001) 2252.

  • Eastman J A, Choi S U S, Li S, Yu W & Thompson L J, Appl Phys Lett, 78 (2001) 718.

  • Yu W, France D M, Routbort J L & Choi S U S, Heat Transf Eng, 29 (2008) 432.

  • Asadi A, Alarifi I M & Foong L K, J Mol Liq, 307 (2020) 112987.

  • Abu-Nab A K & Abu-Bakr A F, Case Stud Therm Eng, 33 (2022) 101973.

  • Khashi’ie N S, Arifin N M & Pop I, Chinese J Phys, 78 (2022) 169.

  • Alsabery A I, Tayebi T, Ghalambaz H T M, Hashim I & Chamkha A J, J Adv Res, 30 (2021) 63.

  • Zhang Y, Shahmir N, Ramzan M, Alotaibi H & Aljohani H M, Case Stud Therm Eng, 26 (2021) 101149.

  • Khan M J, Duraiswamy B, Zuhra S, Nawaz R, Nisar K S, Jamshed W & Yahia I S, Case Stud Therm Eng, 28 (2021) 101673.

  • Haddad S A M, Int J Heat Mass Transf, 68 (2014) 659.

  • Minea A A, Int J Heat Mass Transf, 104 (2017) 852.

  • Usman M, Hamid M, Zubair T, Haq R U & Wang W, Int J Heat Mass Transf, 126 (2018) 1347.

  • Siddiqui F R, Tso C Y, Chan C K, Fu S C & Chao C Y H, Int JHeat Mass Transf, 132 (2019) 1200.

  • Aghakhani S, Pordanjani A H, Afrand M, Sharifpur M & Meyer J P, Int J Mech Sci, 174 (2020) 105470.

  • Moghadassi A, Ghomi E & Parvizian F, Int J Therm Sci, 92 (2015) 50.

  • Das S, Sarkar S & Jana R N, Bionanoscience, 10 (2020) 950.

  • Kadhim H T, Jabbar F A & Rona A, Int J Mech Sci, 186 (2020) 105889.

  • Sui J, Zheng L & Zhang X, Int J Therm Sci, 104 (2016) 461.

  • Reddy M G, Rani S M V V N L, Kumar K G, Prasannakumar B C & Lokesh H J, Phys A Stat Mech Appl, 551 (2020) 123975.

  • Garia R, Rawat S K, Kumar M & Yaseen M, Chinese J Phys, 74 (2021) 421.

  • Elshehabey H M, Hady F M, Ahmed S E & Mohamed R A, Int Commun Heat Mass Transf, 57 (2014) 228.

  • Du R, Gokulavani P, Muthtamilselvan M, Al-Amri F & Abdalla B, Int Commun Heat Mass Transf, 116 (2020) 104676.

  • Mehryan S A M, Kashkooli F M, Ghalambaz M & Chamkha A J, Adv Powder Technol, 28 (2017) 2295.

  • Suresh S, Venkitaraj K P, Selvakumar P & Chandrasekar M, Colloids Surfaces A Physicochem Eng Asp, 388 (2011) 41.

  • Aladdin N A L, Bachok N & Pop I, Alex Eng J, 59 (2020) 657.

  • Tahira S, Mustafa M & Mushtaq A, Proc Inst Mech Eng Part C J Mech Eng Sci, 236 (2022) 1524.

  • Lund L A, Omar Z, Khan I, Seikh A H, Sherif E S M & Nisar K S, J Mater Res Technol, 9 (2020) 421.

  • Abu-Hamdeh N H, Abusorrah M A, Bayoumi M M, Oztop H F & Sun C, J Therm Anal Calorim, 144 (2021) 2627.

  • Khan J A, Mustafa M, Hayat T & Alsaedi A, PLoS One, 10 (2015) 1.

  • Christov C I, Mech Res Commun, 36 (2009) 481.

  • Devi S S U & Devi S P A, Can J Phys, 94 (2016) 490.

  • Meena O P & Pranitha J, AIP Conf Proc, 2246 (2020) 020019.

  • Pranitha J & Meena O P, Int J Eng Sci, 2 (2020) 9.

  • Meena O P, Pranitha J & Ganesh K K, Appl Math Comput, 430 (2022) 127072.

  • Meena O P, Pranitha J & Srinivasacharya D, Int J Appl Comput Math, 7 (2021) 59.

  • Khan H B M D, Prasad V R & Bhuvana V R, Nonlinear Eng, 7 (2018) 253.

  • Venkatadri K, Bég O A, Rajarajeswari P & Prasad V R, Int J Mech Sci, 171 (2020) 105391.

  • Bég O A, Venkatadri K, Prasad V R, Bég T A, Kadir A & Leonard H J, Mater Sci Eng B Solid State Mater Adv Technol, 261 (2020) 114722.

  • Pordanjani A H, Vahedi S M, Aghakhani S, Afrand M, Öztop H F & Abu-Hamdeh N, Eur Phy J Plus, 134 (2019) 12763.

  • Hayat T, Muhammad T, Alsaedi A & Mustafa M, PLoS One, 11 (2016) 1.

  • Alnaqi A A, Aghakhani S, Pordanjani A H, Bakhtiari R, Asadi A & Tran M D, Int J Heat Mass Transf, 133 (2019) 256.

  • Kashyap D & Dass A K, Int J Mech Sci, 157 (2019) 45.

  • Mehryan S A M, Izadpanahi E, Ghalambaz M & Chamkha A J, J Ther Anal Calorim, 137 (2019) 965.

  • Brinkman H C, J Chem Phys, 20 (1952) 571.

  • Pirmohammadi M & Ghassemi M, Int Commun Heat Mass Transf, 36 (2009) 776.

  • Sarris I E, G K Zikos, Grecos A P & Vlachos N S, Numer Heat Transf B : Fundament: An Int J, 50 (2007) 157.

  • Rashad A M, Chamkha A J, Ismael M A & Salah T, J Heat Transfer, 140 (2018) 7.

  • Mamourian M, Shirvan K M & Pop I, Int Commun Heat Mass Transf, 79 (2016) 46.

  • Shirvan K M, Mamourian M, Mirzakhanlari S, Ellahi R & Vafai K, Int J Heat Mass Transf, 105 (2017) 811.

  • Mackolil J & Mahanthesh B, Appl Nanosci, (2021) 01631. DOI:10.1007/s13204-020-01631-4


Abstract Views: 98

PDF Views: 45




  • Magneto-Hybrid Nanofluid (Al2O3 / Cu−Oil) Flow in a Porous Square Enclosure with Cattaneo-Christov Heat Flow Model-Sensitivity Analysis

Abstract Views: 98  |  PDF Views: 45

Authors

N. Vinodhini
Department of Mathematics, School of Advances Sciences, Vellore Institute of Technology, Vellore 632 014, Tamil Nadu, India
V. Ramachandra Prasad
Department of Mathematics, School of Advances Sciences, Vellore Institute of Technology, Vellore 632 014, Tamil Nadu, India

Abstract


The rheological behaviour of nanofluids is an important specification that has a substantial impact on the system performance. The effect of an inclined magnetic field on mixed convection in a square cavity through a porous medium has been numerically investigated in the current paper. Various levels of thermal conductivity have been maintained on each wall throughout the system. Additionally, the Cattaneo-Christov heat flow model is influenced in the energy equation. The conservation equations for primary, secondary, and mass momentum, energy, and nanoparticles with wall boundary conditions are dimensionless and coupled to proper scaling transformations. To address the dimensionless nonlinear coupled boundary value problem, a finite-difference computing methodology known as the Harlow-Welch Marker and Cell (MAC) method is used. The fundamental goal of this research is to look at the rheological behaviour of nanoparticles as base fluids in the aforementioned effects. The influence of factors on the physical framework such as Richardson number (Ri), Hartmann number (Ha), Darcy number (Da), Reynolds number (Re), and Prandtl number (Pr) is investigated graphically. The MATLAB software is used to obtain streamlined and isothermal contours. The findings indicate an enhancement in the average Nusselt number with an increase in the parameters. Furthermore, the presence of nanoparticles raises the average Nusselt number for low values of the Reynolds number. The system is analyzed with three convection stages of Richardson number, and it is also found that for mixed convection, the system holds better results. The obtained outcomes are compared with well-known existing findings to validate the present work.

Keywords


Mixed Convection, Al2O3 / Cu−Oil Nanoparticles, Porous Medium, Inclined Magnetic Field, Cattaneo-Christov Model.

References