Journal of Engineering Education Transformations

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Quality Management System Practices Performed in ISO 9001 Certified Engineering Educational Institutions : A Critical Analysis of Indian Universities


Affiliations
1 Department of Mechanical Engineering, National Institute of Technology, Kurukshetra, Haryana, India
2 Snow & Avalanche Study Establishment, Defence Research and Development Organization, Chandigarh, India
     

   Subscribe/Renew Journal


This study aims to analyse the quality management system (QMS) practices performed in ISO 9001 certified engineering educational institutes of India. The literature divulged that QMS in engineering education mainly engrossed on teaching, learning, examinations, student results and infrastructure. Very few studies mentioned QMS in terms of organizational effectiveness. Thus the author has conducted the QMS analysis in forty-five engineering educational institutions (EEIs) of Delhi NCR area in India and selected two groups of institutions based on years of existence. Group-a consists of twenty institutions less than fifteen years old, and group-b consists of twenty-five institutions over fifteen years old. Data were collected using a questionnaire from forty-five engineering educational institutions. The questionnaire was prepared using QMS constructs (ten factors) followed by the institutions and the quality measures followed by the national board of accreditation-NBA in India. Data analysis was done using SPSS 26.0 software to conclude the student t-test and p-value. The author found that the group-b institutions received substantially higher scores in variables that had top management commitment, systemic management approach, customer satisfaction, employee involvement, training, teamwork, continuous improvement, corporate social responsibility, academic culture and knowledge audit compared to group-a institutions. The study also revealed the strong and weak points of the institutional QMS, and there is a strong need to incorporate ISO 9001:2015-based QMS practices for the continuous improvement of institutions.

Keywords

National Board of Accreditation, Quality Management, Customer Satisfaction, ISO 9001:2015 QMS.
Subscription Login to verify subscription
User
Notifications
Font Size


  • Africano, N., Rodrigues, A. S., & Santos, G. (2019). The main benefits of the implementation of the quality management system in higher education institutions in angola. Quality Innovation Prosperity, 23(3), 122–136. https://doi.org/10.12776/QIP.V23I3.1292

  • Aniskina, N. N., & Lunina, E. V. (2018). Piloting of the Integrated Model for Quality Assurance in Education QMCQAF in Russia. Proceedings of the 2018 International Conference “‘Quality Management, Transport and Information Security, Information Technologies’”, IT and QM and IS 2018, 22–26. https://doi.org/10.1109/ITMQIS.2018.8524918

  • Bravi, L., Murmura, F., & Santos, G. (2019). The ISO 9001:2015 quality management system standard: Companies’ drivers, benefits and barriers to its implementation. Quality Innovation Prosperity, 23(2), 64–82. https://doi.org/10.12776/QIP.V23I2.1277

  • Fakhrzad, M. B., Talebzadeh, P., & Goodarzian, F. (2018). Mathematical Formulation and Solving of Green Closed-loop Supply Chain Planning Problem with Production, Distribution and Transportation Reliability. International Journal of Engineering, 31(12), 2059–2067. https://doi.org/10.5829/ije.2018.31.12c.10

  • Farm, E. W. (2005). & Approval Process. 1–6.

  • Iqbal, A., Latif, F., Marimon, F., Sahibzada, U. F., & Hussain, S. (2019). From knowledge management to organizational performance: Modelling the mediating role of innovation and intellectual capital in higher education. Journal of Enterprise Information Management, 32(1), 36–59. https://doi.org/10.1108/JEIM-04-2018-0083

  • Kansal, J., & Singhal, S. (2017). Application and validation of DMAIC six sigma tool for enhancing customer satisfaction in a government R & D organization. International Journal for Quality Research, 11(4), 931–944. https://doi.org/10.18421/IJQR11.04-13

  • Kansal, J., & Singhal, S. (2018). Development of a competency model for enhancing the organisational effectiveness in a knowledge-based organisation. International Journal of Indian Culture and Business Management, 16(3), 2 8 7 . https://doi.org/10.1504/ijicbm.2018.090909

  • Kansal, J., Singhal, S., & Kumar, P. (2014). Integration of Quality and Knowledge Management in Indian R & D Organizations. (Som), 889–893.

  • Kumar, P., Singhal, S., & Kansal, J. (2020). A Critical Model for Achieving the Global Quality in ISO 9001 Certified Engineering Educational Institutions. 79(September), 810–813.

  • Mohammadian, M., Babaei, M., Jarrahi, M. A., & Anjomrouz, E. (2019). Scheduling nurse shifts using goal programming based on nurse preferences: A case study in an emergency department. International Journal of Engineering, Transactions A: Basics, 32(7), 954–963. https://doi.org/10.5829/ije.2019.32.07a.08

  • Pal Pandi, A., Rajendra Sethupathi, P. V., & Jeyathilagar, D. (2016). The IEQMS model for augmenting quality in engineering institutions – an interpretive structural modelling approach. Total Quality Management and Business Excellence, 27(3–4), 292–308. https://doi.org/10.1080/14783363.2014.978647

  • Pandi, A. P., Sethupathi, P. V. R., & Jeyathilagar, D. (2016). Quality sustainability in engineering educational institutions - A theoretical model. International Journal of Productivity and Quality Management. https://doi.org/10.1504/IJPQM.2016.076715

  • Papic, L., & Garcia, A. C. (2017). Significant Factors of the Successful Lean Six-Sigma Implementation. 2(2), 85–109.

  • Psomas, E., & Antony, J. (2015). The effectiveness of the ISO 9001 quality management system and its influential critical factors in Greek manufacturing companies. International Journal of Production Research, 53 (7), 2089–2099. https://doi.org/10.1080/00207543.2014.965353

  • Richert, A., Shehadeh, M., Plumanns, L., Gros, K., Schuster, K., & Jeschke, S. (2016). Educating engineers for industry 4.0: Virtual worlds and human-robot-teams. Proc. of IEEE Global Engineering Education Conference (EDUCON), (April), 142–149. https://doi.org/10.1109/EDUCON.2016.7474545

  • Sá, J. C., Amaral, A., Barreto, L., Carvalho, F., & Santos, G. (2019). Perception of the importance to implement ISO 9001 in organizations related to people linked to quality-an empirical study. International Journal for Quality Research, 13(4), 1055–1070. https://doi.org/10.24874/ijqr13.04-20

  • Sunitha, G., & Avanija, J. (2021). Program assessment and evaluation for continuous quality improvement. Journal of Engineering Education Transformations, 34(3), 42–55. https://doi.org/10.16920/jeet/2021/v34i3/150016

  • Suryan, A., Radhakrishnan, V., Ramachandran, G., Abdul Rahman, M., & Isaac, K. P. (2021). Revision of Undergraduate Engineering Curriculum with Emphasis on Project-Based Teaching Learning Approach - Case Study of KTU. Journal of Engineering Education Transformations, 34(3), 7. https://doi.org/10.16920/jeet/2021/v34i3/128523

  • Vijaya Kumar, N., Petkar, P. K., H. K., M., & Jangali Satish, G. (2021). Integrated Learning Experience Through Activity Based Learning in UG Course. Journal of Engineering Education Transformations, 34(3), 16. https://doi.org/10.16920/jeet/2021/v34i3/14246 5

  • Yang, C. C. (2018). The effectiveness analysis of the practices in five quality management stages for SMEs. Total Quality Management and Business Excellence, 1–23. https://doi.org/10.1080/14783363.2018.1456010


Abstract Views: 181

PDF Views: 0




  • Quality Management System Practices Performed in ISO 9001 Certified Engineering Educational Institutions : A Critical Analysis of Indian Universities

Abstract Views: 181  |  PDF Views: 0

Authors

Parvesh Kumar
Department of Mechanical Engineering, National Institute of Technology, Kurukshetra, Haryana, India
Sandeep Singhal
Department of Mechanical Engineering, National Institute of Technology, Kurukshetra, Haryana, India
Jimmy Kansal
Snow & Avalanche Study Establishment, Defence Research and Development Organization, Chandigarh, India

Abstract


This study aims to analyse the quality management system (QMS) practices performed in ISO 9001 certified engineering educational institutes of India. The literature divulged that QMS in engineering education mainly engrossed on teaching, learning, examinations, student results and infrastructure. Very few studies mentioned QMS in terms of organizational effectiveness. Thus the author has conducted the QMS analysis in forty-five engineering educational institutions (EEIs) of Delhi NCR area in India and selected two groups of institutions based on years of existence. Group-a consists of twenty institutions less than fifteen years old, and group-b consists of twenty-five institutions over fifteen years old. Data were collected using a questionnaire from forty-five engineering educational institutions. The questionnaire was prepared using QMS constructs (ten factors) followed by the institutions and the quality measures followed by the national board of accreditation-NBA in India. Data analysis was done using SPSS 26.0 software to conclude the student t-test and p-value. The author found that the group-b institutions received substantially higher scores in variables that had top management commitment, systemic management approach, customer satisfaction, employee involvement, training, teamwork, continuous improvement, corporate social responsibility, academic culture and knowledge audit compared to group-a institutions. The study also revealed the strong and weak points of the institutional QMS, and there is a strong need to incorporate ISO 9001:2015-based QMS practices for the continuous improvement of institutions.

Keywords


National Board of Accreditation, Quality Management, Customer Satisfaction, ISO 9001:2015 QMS.

References





DOI: https://doi.org/10.16920/jeet%2F2022%2Fv36i1%2F22138